Potassium Formate (For Deicing and Melting Snow) in Ahmedabad
Potassium Formate for Deicing and Snow Melting is a high-performance, environmentally friendly chemical solution ($HCOOK$) recognized for its exceptional ability to significantly lower the freezing point of water. Innovacorp India Pvt. Ltd. provides this advanced deicing agent to Ahmedabad’s industrial and logistics sectors, offering a superior alternative to traditional chloride-based salts due to its non-corrosive properties and high biodegradability.
In the industrial landscape of Ahmedabad, Sanand, and Dahej, our Potassium Formate deicer is primarily utilized in high-sensitivity environments such as airport runways and industrial refrigeration systems. Unlike standard salts, it does not damage concrete structures or corrode metal components, making it the preferred choice for protecting Gujarat's infrastructure while maintaining safe, ice-free surfaces during specialized industrial processes or for export-oriented cold chain logistics.
The action mechanism of the deicing and snow-melting agent is to eliminate the adhesion between the loose road surface and the ice and snow, so that the freezing or snow accumulation is more convenient for the removal of snowplows or snow-clearing and deicing machinery.
The deicing and snow-melting agent is easy to use. When deicing and snow-melting the airport runway, it can be done with the general spraying equipment of the airport.
Usage and Dosage:
If the thickness of the ice layer or snow layer is greater than 3 mm, it is not suitable to use the deicing fluid directly. In this case, the snow removal and deicing machinery should be used to remove the surface snow before spraying the deicing and snow melting agent; because this product can prevent the ice layer from sticking to the road surface, it is easy to clean by a snowplow or a deicing machine. It can also be sprayed on the eve of bad weather as a preventive antifreeze.
Because the effect of deicing agents depends on many factors, such as weather conditions (wind, temperature, humidity, rain, snow, frost, freezing rain, etc.), the materials used on the road surface, and spraying equipment. Therefore, the above usage amount is for reference only, and should be increased or decreased according to the specific circumstances in actual use.
Storage and Transportation: Should be stored in clean and clean polyethylene, fiberglass or stainless steel tanks. Any pollution in storage will adversely affect the deicing and snow melting effect. It can be transported by IBC TANK or stainless steel tanker.